?4模型真空态间的转换算符

本工作在正则量子化的基础上，对$\phi^4$模型的哈密顿量采取正规序来正规化真空零点能，然后微扰计算了至次领头阶的真空态修正。同时首次得到可以在$\phi^4$模型的两个真空态之间转换的算符，我们相信这个算符也是适当极限条件下产生$\phi^4$扭结(kink)的算符的形式。最后简要说明了真空能的应用。     

CdSe波片6～12μm波段增透膜研究

采用垂直无籽晶气相升华法生长出直径37 mm的优质硒化镉(CdSe)单晶体,并沿光轴方向切割出20 mm×20 mm×3 mm的CdSe波片初胚.经研磨和抛光,在2～20μm波段CdSe波片的红外透过率约为70;.为进一步提高波片的透过率,采用Essential-Macleod软件辅助设计方案,选用YF3和ZnS为双层增透膜材料,并获得最佳的膜系厚度.镀膜后的CdSe波片在6～12μm波段透过率达到90;,在10.5μm处的透过率最高,峰值高达99;.     

超临界水驱超稠油提高采收率热物理特性研究

超稠油资源的高效开发对于提高石油供给和保障我国石油安全意义重大。针对深层超稠油资源由于原始地层压力高、原油黏度大导致常规蒸汽驱无法有效开发的问题,本文提出超临界水驱开发深层超稠油的新思路。本文首先研制了超临界水驱油提高采收率实验平台,研发的管式填砂岩心模型能够模拟岩心升温和驱替的同步过程,然后开展了超临界水驱、蒸汽驱和热水驱对比实验研究,实验结果表明,相对于蒸汽驱,超临界水驱能显著提高采收率并具有更高的热效率,25MPa、400℃超临界水驱鲁克沁超稠油的采收率达到97.07%;获得了超临界水驱过程的温度场和驱替压差变化规律,发现了超临界水超覆现象,与蒸汽超覆相比,超临界水超覆发生晚且持续短,可扩大波及范围,提高采收率。     

Integrable boundary conditions for the B_2 model

New integrable B_2 model with off-diagonal boundary reflections is proposed. The general solutions of the reflection matrix for the B_2 model are obtained by using the fusion technique. Wefind that the reflection matrix has 7 free boundary parameters, which are used to describe the degree of freedom of boundary couplings, without breaking the integrability of the system. The new quantization conditions will induce the novel structure of the energy spectrum and the boundary states. The corresponding boundary effects can be studied based on the results in this paper. Meanwhile, the reflection matrix of high rank models associated with Bnalgebra can also be obtained by using the method suggested in this paper.     

焊后热处理对聚变堆用奥氏体不锈钢MAG焊焊缝金属冲击韧性的影响

After heat treatment of metal active gas arc welding (MAG weld) joints of 316LN austenitic stainless steel for fusion reactor at different temperatures, Charpy impact test at liquid nitrogen temperature was carried out. The effects of heat treatment temperature on microstructure, fracture morphology and precipitates were studied with optical microscope, SEM and EDS analysis. Results indicated that the impact toughness of weld metal could be significantly improved by 873K heat treatment. However, with the rising of heat treatment temperature, the precipitates were generated gradually along the grain boundary and a gradual decrease of toughness occurred as well. All fracture was ductile. The dimple became shallow and less with the increase of temperature. Spherical and irregular precipitates were found at the bottom of the dimple. The spherical precipitates generated during welding were free from the influence of the heat treatment, and the irregular precipitates increased with the rising of temperature. High content of Mo in filler materials led to a great segregation of Mo at the grain boundary, which would promote the precipitation of σ phase. Impact toughness of weld metal decreased significantly when continuous distribution of σ phase formed at grain boundary.     

基于能力培养的应用型本科物理实验教学模式探索

通过对传统大学物理实验教学现状的分析和讨论,针对目前大学物理实验课程的教学模式进行研究,在遵循实验教学自身规律的前提下,构建“模块化”实验课程教学模式,从而改善课程结构,为培养学生解决具体问题的实践能力和创新思维提供针对性的训练;并采用“启发式”“问题式”的教学方法和多样化的考核评价标准,对于不同专业、不同基础、不同背景的学生进行差异化教学,建立以人才培养为核心的科学教学体系,进一步提高大学物理实验课程的教学质量和效果.     

基于器件结构提高TADF-OLED器件的发光性能

为了提高以TADF材料作为主体、天蓝色荧光材料作为客体的混合薄膜的OLED器件光电性能,我们调整了器件结构,使主体材料发挥其优势。制备了基本结构为ITO/NPB(40 nm)/DMAC-DPS∶x%BUBD-1(40 nm)/Bphen(30 nm)/LiF(0.5 nm)/Al的OLED器件。研究了主-客体材料在不同掺杂浓度下的OLED器件的光电特性。为了提高主体材料的利用率,在空穴传输层和发光层之间加入10 nm的DMAC-DPS作为间隔层;然后,在阳极和空穴传输层之间加入HAT-CN作为空穴注入层,形成HAT-CN/NPB结构的PN结,有效降低了器件的启亮电压(2.7 V)。测量了有无HAT-CN的单空穴器件的阻抗谱。结果表明,在最佳掺杂比例(2%)下,器件的外量子效率(EQE)达到4.92%,接近荧光OLED的EQE理论极限值;加入10 nm的DMAC-DPS作为间隔层,使得器件的EQE达到5.37%;HAT-CN/NPB结构的PN结有效地降低了器件的启亮电压(2.7 V),将OLED器件的EQE提高到5.76%;HAT-CN的加入提高了器件的空穴迁移率,降低了单空穴器件的阻抗。TADF材料作为主体材料在提高OLED器件的光电性能方面具有很大的潜力。     

Adsorption Site Regulation to Guide Atomic Design of Ni–Ga Catalysts for Acetylene Semi‐Hydrogenation

Atomic regulation of metal catalysts has emerged as an intriguing yet challenging strategy to boost product selectivity. Here, we report a density functional theory‐guided atomic design strategy for the fabrication of a NiGa intermetallic catalyst with completely isolated Ni sites to optimize acetylene semi‐hydrogenation processes. Such Ni sites show not only preferential acetylene π‐adsorption, but also enhanced ethylene desorption. The characteristics of the Ni sites are confirmed by multiple characterization techniques, including aberration‐corrected high‐resolution scanning transmission electron microscopy and X‐ray absorption spectrometry measurements. The superior performance is also confirmed experimentally against a Ni₅Ga₃ intermetallic catalyst with partially isolated Ni sites and against a Ni catalyst with multi‐atomic ensemble Ni sites. Accordingly, the NiGa intermetallic catalyst with the completely isolated Ni sites shows significantly enhanced selectivity to ethylene and suppressed coke formation.     

平板几何迁移算子的特征值问题

研究L^p(1相似文献   

传输线方程的高精度龙格−库塔数值求解方法

提出了一种求解传输线方程的高精度龙格-库塔(RK)方法。此方法在空间上采取高阶泰勒展开,提高了对空间微分的近似精度,减少了数值色散所带来的误差。与传统的时域有限差分法(FDTD)方法相比,在每波长采样数相同时,RK方法的计算精度更高。同时,根据Taylor模型,对外界平面波激励源进行离散,成功利用RK方法对外部场激励传输线进行求解,扩大了龙格-库塔方法在求解传输线方程时的应用范围。通过编程对平面波辐照下无限大地平面上的单导体与双导体的算例分别应用FDTD方法与RK方法进行了计算,验证了RK方法的正确性。结果表明同等计算条件下RK方法的计算精度更高。